Keypad Commands; Access Codes - DSC PC5015 Installation Manual

All keypads provide complete information and control of the alarm panel. The panel can be completely programmed
via any keypad on the system. LED keypads provide function indicator lights and individual zone indicator lights for
the alarm circuits. The LCD keypad provides function indicator lights and word descriptions for zone status.
The following sections describe how to arm, disarm and perform other keypad functions.
3.1

Access Codes

All 37 access codes have the ability to arm/disarm any Partition(s) it is enabled for and to activate the PGM
Outputs using the [ ][7] commands (See Section 3.4 "[ ] Commands, [ ][7]") .
Additional access code attributes are also programmable. Attributes determine what abilities the code will have.
To program each attribute;
1. Enter [ ] [5] [Master Code] [9] to enter the attribute programming mode.
2. Enter the 2-digit number of the access code you want to edit.
3. Enter the attribute number to toggle it on or off.
The programmable attributes are as follows:
• Attribute 1: Partition 1 Operation enabled
• Attribute 2: Partition 2 Operation enabled
• Attribute 3: Zone Bypass enabled
This attribute allows the user to bypass zones.
• Attribute 4: Escort5580 Remote Access
This attribute allows the user to access the security system via the Escort, if installed.
• Attribute 5: Downlook Remote Trigger to Telephone Number 1
For use with the Escort5580 and the PC5108L/DLM-4L (see the PC5108L Installation Manual for details).
• Attribute 6: Downlook Remote Trigger to Telephone Number 2
For use with the Escort5580 and the PC5108L/DLM-4L (see the PC5108L Installation Manual for details).
"Master Code" attributes cannot change. By default, each code has the attributes of the code used to
program it.
• Attribute 7: Bell Squawk on Arming/Disarming. When this attribute is turned on, the bell will squawk
when the access code is entered to arm or disarm the system. For example, you can use the arm/
disarm bell squawk attribute to have wireless key access codes squawk the bell, while other codes are
silent. To do this, enable attribute [7] on all access codes associated with wireless keys.
If you enable the Bell Squawk on Arming/Disarming option (section [014], option [1]), the bell will
sound arm/ disarm bell squawks for all access codes, regardless of the programming for attribute [7].
(See 5.20 "Arming and Disarming Options".)
The available access codes are as follows:
General Access Codes - Access Codes [01] to [32]
Each access code can be used to arm and disarm the system. Enable any of the access code attributes
to allow access to the above-mentioned functions (access code attributes 1-6).
Duress Codes - Access Codes [33] and [34]
When a Duress Code is used to perform any function the panel will report a Duress Reporting Code (See
Section 5.7 "Communicator - Reporting Codes") .
Partition Master Codes - Access Codes [41] and [42]
Partition Master Codes can program additional access codes and the Duress Code for their Partition.
System Master Code - Access Code [40]
By default the System Master Code is enabled to operate on both Partitions and can perform any keypad
function. This code can be used to program all access codes as well as the Partition Master Codes and
Duress Codes.
If the Master Code Not Changeable option is enabled the System Master Code can only be changed
using Installer Programming.
For instructions on programming access codes, see the PC5015 Instruction Manual ("Programming
Access Codes").
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Code Required for Bypass ..................................... Section [015], Option [5]
Master Code Not Changeable option .................... Section [015], Option [6]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Maintenance Code
The maintenance code can only be used to arm and disarm the system. It cannot be used to bypass
zones or to access the Escort5580. The code can only be programmed in Installer's Programming.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Maintenance Code .................................................. [008]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Keypad Commands

S E C T
13
I O N 3