Placing Crushed Glass In The Intake Channel (Between Panes Of Glass) - Optional - DaVinci Category 1 Owner's Manual

Placing Crushed Glass in the Intake Channel (Between Panes of Glass) - OPTIONAL

Glass Quantity = 0.75 Pound (0.33 Kg) Per Linear Foot (300mm)
Glass Quantity – Island, Pier, & Bay Ends = 1.25 (0.6 Kg) Pounds Per End
Determine the amount of glass needed for the fireplace being installed. Set this glass aside in portions to allow for an even
amount of glass to be placed over the media trays in the intake channel. NOTE: It is better to install too little glass than too
much.
(a) On Pier, Island, and Bay models, make sure the side outer glass is in place. Open up a bag of crushed glass and
pour it evenly on to the media tray(s). Use a brush or glove to evenly distribute the glass over the surface.
© Travis Industries
Installation
1 Level Cup (8 fl. oz.) (240ml) = 0.95 lbs.
So...1 Slightly Rounded Cup = 1 lb.
(for qualified installers only)
4140805
59
100-01384