Typical Framing Dims - Left-Sided Corner; Minimum Framing Dimensions - DaVinci Category 1 Owner's Manual

Typical Framing Dims – Left-Sided Corner
3" (77mm) Maximum for vent clearance. Do not place
vertical framing directly in the center above the fireplace - it
will infringe upon the vent clearance requirements.
Recessing the Back Edge of the Fireplace (Optional)
Installers may wish to recess the back of the fireplace to allow for a more shallow installation, placing the side
glass next to the side wall(s). If you decide to recess the back of the fireplace, make sure to accommodate the
framing and facing dimensions. The back edge of the glass extends to a location 5.75" (147mm) from the back
of the fireplace (see dimensions page for details). Framing for this type of installation may protrude forward
from the back wall of the opening a maximum of 5.25" (134mm) when using ½" (13mm) drywall. Consult the
dimensions page and plan your installation prior to framing the opening.

Minimum Framing Dimensions

Version
42" Left Corner
54" Left Corner
66" Left Corner
© Travis Industries
Installation
(for qualified installers only)
y
Max. 5.25"
134mm
Width (x) Height (y) –
12" Glass
43.5" (1105mm)
46.625"
55.5" (1410mm)
(1185mm)
67.5" (1715mm)
20"
508mm
x
Height (y) –
20" Glass
54.625"
(1388mm)
4140805
Height (y) – Height (y) –
30" Glass 36" Glass
64.625" 70.625"
(1642mm) (1794mm)
100-01384
23