Typical Framing Dims. - See Through Configuration; Minimum Framing Dimensions - DaVinci Category 1 Owner's Manual

18
Typical Framing Dims. – See Through Configuration
Important Notes Regarding Framing
We strongly suggest framing around the fireplace after it is in place. If you do frame before
fireplace placement, add 6" to each side to allow for fireplace access.

Minimum Framing Dimensions

Version
36" See Through
48" See Through
60" See Through
© Travis Industries
Installation
19.625"
499mm
x
Width (x) Height (y) –
12" Glass
38.5" (978mm)
46.625"
50.5" (1283mm)
(1185mm)
62.5" (1588mm)
(for qualified installers only)
When using a top plate, you may need to notch it at
the center to provide adequate vent clearance.
3" (77mm) Maximum for vent clearance.
Do not place vertical framing directly in the
center above the fireplace - it will infringe
upon the vent clearance requirements.
y
Height (y) –
20" Glass
54.625"
(1388mm)
4140805
Height (y) – Height (y) –
30" Glass 36" Glass
64.625" 70.625"
(1642mm) (1794mm)
100-01384