Table of Contents
Advertisement
5.
Mix epoxy in mixing cup and use a tapered
stick to apply the epoxy inside the pre-drilled
holes in the leading edge of the rudder. Apply
epoxy to trailing edge of each hinge.
6.
Carefully slide the rudder onto each hinge and
against the trailing edge of the fin. Wipe away
excess epoxy with alcohol wetted wipes.
7. Ensure there is no gap between fin and rudder.
Allow epoxy to fully cure.
Note: We have supplied clear Ultracote for seal-
ing the hinge gaps. This is an optional step but is
recommended
Rudder Servos Installation
1. Gather one rudder servo with double output arm
as shown below. Note: 180 in. oz. digital, metal
geared servo is recommended. Servo selection
can be the difference between a great flying
model and a model that will crash. Always use
brand name high quality servos.
22
Hide quick links:
Advertisement
Table of Contents
