Table of Contents
Advertisement
ascade
C
The following instructions outline a typical water treatment system installation. Consult local plumbing codes and building
regulations as they may pose different or additional requirements for the installation. The installer is responsible for ensur-
ing that the installation is in compliance with all applicable state and local regulations.
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper comple-
tion of this installation will require basic famil iarity with standard sink plumbing and proper use of common hand and power
tools. Improperly installed systems could result in water damage due to leaks or flooding.
The connection parts kit supplied with the Cascade Drinking Water Filtration System includes components which repre sent
the most common under-sink plumbing connections currently in use within the United States. If these components do not
match the type of connections installed at your location, contact a local hardware or plumbing supplier to obtain the correct
fittings.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after
the system.
A
C
(shown from back)
Typical Installation Diagram
4
1
Typical Installation Diagram
B
D
E
FILTER SYSTEMS WITH
NON AIR GAP FAUCET
42445 Avenida Alavardo, Temecula, CA 92590
(800) 451-9343, www.nimbuswater.com
BACK COVER
14.25"
2
A. Blue feed water tubing
B. Green product water tubing
C. GAC carbon filter
D. GAC carbon filter
E.
Sediment pre-filter
60034.DWG
5
Advertisement
Table of Contents
