15.
To create an image,
select the Create Image
mode under the General
section and then click
Next.
16.
Or you can choose to
burn it directly to a disc
by selecting the Direct
Burn mode under the
General section.
Select the optical device
and all other necessary
settings and then click
Next.
Appendix A NLITE and AHCI Installation Guide
Appendix A
17.
You have finished cus-
tomizing the Windows
XP installation disc. Click
Finish.
Enter the BIOS utility to
configure the SATA con-
troller to RAID/AHCI. You
can now install Windows
XP.
61
www.dfi.com