Clear Cmos Data; Sata Dom Power Select - DFI RL830-C602 User Manual

Clear CMOS Data

If you encounter the followings,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP7 pins 2 and 3 to On. Wait for a few seconds and set JP7 back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
Chapter 2 Hardware Installation
Chapter 2

SATA DOM Power Select

3
2
1
1-2 On: Normal
(default)
JP7
3
2
1
2-3 On:
Clear CMOS Data
The JP13 is used to select the power of SATA DOM.
15
SATA 4
Note:
SATA port 4 provides adequate space for SATA DOM.
1 2 3
1-2 On: GND
(default)
JP13
1 2 3
2-3 On: +5V
www.dfi.com