DFI RL830-C602 User Manual page 33

SATA Configuration
This section is used to configure the settings of SATA device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Confi guration
SATA Port 0
Not Present
SATA Port 1 Not Present
SATA Port 2
Not Present
SATA Port 3
Not Present
SATA Port 4
Not Present
SATA Port 5 Not Present
SATA Port 6(SCU)
Not Present
SATA Port 7(SCU)
Not Present
SATA Port 8(SCU) Not Present
SATA Port 9(SCU)
Not Present
SATA (Port0~Port5) Mode
[IDE Mode]
Serial-ATA Controller 0
[Compatible]
Serial-ATA Controller 1
[Enhanced]
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
SATA Mode
The mode selection determines how the SATA controller(s) operates.
IDE Mode
This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Inter-
face).
SATA Controller 0/1
This field is used to enable or disable the Serial ATA controller 0/1.
Chapter 3 BIOS Setup
Chapter 3
(1) IDE Mode
(2) AHCI Mode
(3) RAID Mode.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
33
When AHCI or RAID mode is selected in the SATA Mode Selection, it will display the
following information:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
SATA Confi guration
SATA Port 0 Not Present
SATA Port 1
Not Present
SATA Port 2
Not Present
SATA Port 3
Not Present
SATA Port 4 Not Present
SATA Port 5
Not Present
SATA Port 6(SCU)
Not Present
SATA Port 7(SCU)
Not Present
SATA Port 8(SCU) Not Present
SATA Port 9(SCU)
Not Present
SATA (Port0~Port5) Mode
[AHCI Mode]
Port 0 Hot Plug [Disabled]
Port 1 Hot Plug
[Disabled]
Port 2 Hot Plug
[Disabled]
Port 3 Hot Plug
[Disabled]
Port 4 Hot Plug [Disabled]
Port 5 Hot Plug
[Disabled]
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Port 0~5 Hot Plug
Enables or disables the support of the SATA port hot plug.
(1) IDE Mode
(2) AHCI Mode
(3) RAID Mode.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi .com