I/O Connectors; Sata (Serial Ata) Connectors - DFI RL830-C602 User Manual

I/O Connectors

SATA (Serial ATA) Connectors

SATA 6
SATA 9 SATA 7
SATA 8 SATA 5
SATA 2.0 3Gb/s
Features
• 6 Serial ATA ports
(Intel ® C602J)
- 2 SATA 3.0 ports with data transfer rate up to 6Gb/s
- 4 SATA 2.0 ports with data transfer rate up to 3Gb/s
10 Serial ATA ports (Intel C604)
®
- 2 SATA 3.0 ports with data transfer rate up to 6Gb/s
- 8 SATA 2.0 ports with data transfer rate up to 3Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
• Supports RAID 0/1/5/10
Chapter 2 Hardware Installation
Chapter 2
7 1
SATA 3.0 6Gb/s
SATA 1
SATA 0
7 1
SATA 3
SATA 4
SATA 2
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Note:
1. SATA port 4 provides adequate space for SATA DOM.
2. SATA 6 to SATA 9 on the RL830-C604 system board do not support the DVD boot
function.
21
www.dfi .com