Jumper Settings; Bmc Reset; Usb Power Select - DFI RL830-C602 User Manual

Jumper Settings

BMC Reset

JP1
3
3
2
2
1 1
1-2 On: Normal 2-3 On:
(default) Reset BMC
BMC stands for Board Management Controller. This controller is usually used on server-grade
boards. The BMC on the RL830 motherboard is the Aspeed AST1400 chip. JP1 allows you to
reset the BMC controller whenever problem occurs.
Chapter 2 Hardware Installation
Chapter 2

USB Power Select

3
2
1
USB 6-7
1-2 On: +5V (JP3)
(default)
3 USB 4-5
(JP4)
2
1
2-3 On:
+5V_standby
JP3, JP4, JP5 and JP6 are used to select the power of the USB devices. Selecting +5V_standby
will allow you to use a USB device to wake up the system.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
14
USB 10-11 USB 12 (JP6)
(JP5)
1 2 3
1 2 3
1-2 On: +5V 2-3 On:
(default) +5V_standby
www.dfi.com