DFI RL830-C602 User Manual page 12

7. Insert the CPU into the
socket. The gold triangular
mark on the CPU must
align with the corner of
the CPU socket shown on
the photo.
The CPU's notch will at
the same time fit into the
socket's alignment key.
Important:
The CPU will fit in only one orientation and can easily be inserted without exerting
any force.
Chapter 2 Hardware Installation
Chapter 2
Gold triangular mark
Alignment key
Alignment key
8. Close the load plate then
push the load lever down.
9. Hook the load lever under
the retention tab.
Retention
tab
12
Load lever
Retention
tab
Load lever
www.dfi.com