Sony SAL135F18Z Service Manual page 29

HELP16
Adhesive bond (B-40): J-6082-614-A
1. Rotate the focus cam ring assy to allowed direction, set to the near position.
2. Install the 2 lens block to the length grove barrel assy side. Apply the adhesive bond (B-40) to the screwed portions of 2 roller screws.
Then, fix the 2 group lens block with the 2 roller and the 2 roller screws at three locations.
Note:
Select the 2 roller with a play of 0 to 0.010mm with respect to the groove width of length grove barrel assy.
Part Code Part Name
2-897-888-01 2 C roller
2-897-889-01 2 K roller
2-897-890-01 2 L roller
2 Roller Screw
(Apply the adhesive bond (B-40) (3 places))
2 Lens Block
Focus 1 Cam Ring Assy
3. Confirm that the focus 1 cam ring assy rotates smoothly.
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
Diameter
D1 D2 D3
3.99 4.50 3.50
4.00 4.52 3.50
4.01 4.53 3.50
2 Roller
(3 places)
135mm F1.8 ZA)
*
D2
D3
D1
HELP