Sony SAL135F18Z Service Manual page 14

HELP03
Adhesive bond (B-10): J-6082-612-A
1. Install the focus ring and tighten three screws to fix it.
2. Apply the adhesive bond (B-10) to the heads of screws.
HELP04
Adhesive bond (B-40): J-6082-614-A
1. Install the rear light shiled ring block, apply the adhesive bond (B-40) to the screws, and tighten three screws.
Note:
Be careful not to drop screws in the lens.
2. Confirm that the preset ring moves smoothly.
Screws
(Apply the adhesive bond (B-40))
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
Screws
(Apply the adhesive bond (B-10))
Preset Ring
135mm F1.8 ZA)
*
Screw
(Apply the adhesive bond (B-40))
Light Shield Ring Block
HELP