Sony SAL135F18Z Service Manual page 28

HELP15
Adhesive bond (B-10): J-6082-612-A
Special driver:
1. Rotate the focus 1 cam ring assy in the arrow direction to make the infinity end.
2. Install the zoom brush and tighten two screws to fix it. (Use the special driver: J-6082-654-A)
3. Confirm that the brush securely contacts the trace on F-ECD flexible and has no bending.
4. Perform the adjustment of focus brush position. (Refer to 4-8.)
5. After finishing the position adjustment, apply the adhesive bond (B-10) to the location of screwed portion shown in figure.
Pattern of F ECD Flexible
Focus 1 Cam Ring Assy
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
J-6082-654-A
Zoom Brush
Apply the adhesive bond
(B-10)
135mm F1.8 ZA)
*
Screws
Zoom Brush
HELP