HELP08
Adhesive bond (B-10): J-6082-612-A
1.
Hook the one end of main spring to the lever of preset ring and the other end to lever of main spring guide.
2.
Fix the main spring guide with two screws.
Note:
When installing the main spring guide, place the main spring in the inner side of cut and elected portion.
3.
Apply the adhesive bond (B-10) to the heads of screws.
4.
Confirm that the preset ring moves smoothly.
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
Screws
(Apply the adhesive bond (B-10))
Main Spring Guide
Main Spring
Preset Ring
135mm F1.8 ZA)
*
HELP