Sony SAL135F18Z Service Manual page 18

HELP07
Adhesive bond (B-10): J-6082-612-A
1. Install the contact flexible guide and tighten two screws to fix it.
2. Apply the adhesive bond (B-10) to the heads of screws.
Screw
(Apply the adhesive bond (B-10))
3. Install the writing flexible of contact block to the contact board guide with two screws.
4. Apply the adhesive bond (B-10) to the heads of screws.
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
Screw
(Apply the adhesive bond (B-10))
Contact Flexible Guide
Screws
(Apply the adhesive bond (B-10))
Install the writing flexible
Contact Flexible Guide
135mm F1.8 ZA)
*
HELP