Sony SAL135F18Z Service Manual page 12

HELP01
Adhesive bond (B-10):
Filter screw frame removing tool: J-6082-649-A
1. Apply the adhesive bond (B-10) in 10mm width to the location shown in figure of draw ring assy.
Apply the adhesive bond (B-10)
(width 10mm)
2. Aligning the inner cut portions at three locations with the guide pins, install the screw filter frame assy with the print of [1.8/135]
placed at the distance scale window side.
Inner Cut Portions
Guide Pin
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
Note for assembling and grease applying positions are shown.
J-6082-612-A
Apply the adhesive bond (B-10)
(width 10mm)
Draw Ring Assy
Screw Filter Frame Assy
Inner Cut Portions
Guide Pins
Distance Scale Window
135mm F1.8 ZA)
*
HELP
HELP