Deleting or uninstalling devices
If the driver software is not installed successfully, the PC will be unable to recognize the
camera. In this situation, delete the drivers as described below. Then use the procedure on
p.2-12 to re-install the drivers.
* Note that this procedure is only required for Windows 98 and Windows 98SE.
1
Load the memory card into the camera. (
2
Connect the AC adapter to the camera.
2
3
Connect the camera to your PC using the dedicated USB cable
and then start up the PC.
4
Press the POWER button
5
Right-click [My Computer] and
select [Properties].
6
When the System Properties
window opens, click the [Device
Manager] tab.
2-18
(Windows 98 and Windows 98SE only)
to switch the camera on.
H
p.1-3)