Power Save; Switching The Camera Off - Kyocera Finecam SL400R Instruction Manual

1
Switch the camera on and press
button until the "
2
Press or
U
[INSERT DATE] and then press
3
Press or
U
[NO DATE] or [WITH DATE] and then press
the OK button
4
Date insertion is set and the screen in step 2 reappears.
• The default setting for this function is [NO DATE].
• If you set [WITH DATE], the date is permanently displayed in the lower-right corner of the LCD
monitor during shooting.
• If the background where the date is inserted is a bright color such as white or yellow, the numbers
in the date may be difficult to read.

[POWER SAVE]

Forgetting to switch the camera off can cause the camera's battery charge to fall to a low
level. For this reason, the camera features a Power Save function that automatically
switches the camera off after several minutes if it is left switched on.
You can specify the delay until the camera is switched off.
1
Switch the camera on and press
button until the "
2
Press or
U
[POWER SAVE] and then press
" icon lights on the mode select LED.
G
on the 4-way button to select
D
on the 4-way button to select
D
.
E
Automatically to Save Power
" icon lights on the mode select LED.
G
on the 4-way button to select
D
or
O Q
.
R

Switching the Camera Off

or
O Q
.
R
on the mode
SET UP(1/3)
F MODE S F
FORM T EXECUTE
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2004.01.01
INSERT D TE NO D TE
SET UP(1/3)
F MODE S F
FORM T EXECUTE
BRIGHT CNTRL FR MES
B CKLIGHT BRIGHT
D TE NO D TE
INSERT D TE WITH D TE
on the mode
SET U (2/3)
OWER SAVE 3MIN.
MODE LOCK OFF
+ 2
BEE
+ 2
SHUTTER VOL
COLOR SELECT YELLOW
START SCREEN SET
6
6-5