Disconnecting The Usb Cable From A Macintosh Computer - Kyocera Finecam SL400R Instruction Manual

■
Memory card folder configuration
On Macintosh computers, the folders on camera memory cards are configured as shown
below.
untitled
2
*1 DCIM: Digital Camera IMage
*2 MISC: Miscellaneous
• Do not delete image data on a memory card on your Macintosh. Erase images on the
camera.
• The same file name cannot be used in the same folder. If one of the images is erased on
the camera, that file name is skipped.
• If you use the Energy Saver function and wake your Macintosh up from sleep mode, it may
not be possible to resume communication.
• When you want to edit an image (resizing, rotating, etc.), do not forget to copy the image
to your Macintosh beforehand. If you directly edit the image on the memory card, the
image will no longer be viewable in the camera.
• Do not format memory cards on your Macintosh as this may result in you being unable to
use the memory card on the camera.

Disconnecting the USB cable from a Macintosh computer

Drag the [untitled] (Mac OS 9) or [NO_NAME] (Mac OS X) folder on the desktop to the
Trash. Check that the "It is now safe to disconnect the device" message is displayed or that
the [untitled] (Mac OS 9) or [NO_NAME] (Mac OS X) icon is no longer displayed on the
desktop before disconnecting the USB cable.
2-22
1
DCIM*
100KCBOX
KIF_0001.jpg
KIF_0002.jpg
KIF_0003.avi
KIF_0004.jpg
KIF_0005.jpg
•
•
2
MISC*
RESIZE
R00_0001.jpg
R00_0002.jpg
•
•
•
R00_9999.jpg
Still image/Movie
The same file name cannot be used in the same
folder. If one of the images is erased on the camera,
that file name is skipped.
This folder is created when DPOF print settings are
specified ( p.5-20).
Resized images are recorded
here.