Removing The Memory Card; Write Protect Switch (Sd Memory Cards Only); The Aa Batteries May Also Be Used - Kyocera Finecam L4 Instruction Manual

Removing the memory card

Write Protect Switch (SD Memory Cards only)

Write protect
switch
Slide down to lock.

The AA batteries may also be used.

You can also use 2 nickel metal hydride rechargeable battery and 2AA nickel batteries other
than the supplied lithium battery pack (CR-V3).
Push the memory card once so that the card comes
out. Then pull out the card.
SD Memory Cards are provided with a
write protect switch.
When this switch is moved downward,
further recording on the card is disable and
any images and data already on the card
are protected.
While the card is write-protected, shooting
or erasing images are disabled and the
WRITE PROTECT
"WRITE PROTECT" will be displayed on
the LCD monitor.
● In comparison with the supplied CR-V3,
● Manganese batteries have low electric
Preparation of Camera
the recording capacity and playback time
will be shortened by using the batteries
above.
capacity to use for the camera. If they
should be used, their state may improp-
erly be detected, causing malfunction of
the camera.
15