On The Lcd Monitor - Kyocera Finecam SL400R Instruction Manual

4
Press or
U
[ISO] and then press
5
Press or
U
the desired ISO setting and then press the
OK button
E
[No icon] AUTO: The camera sets the ISO sensitivity to suit
[ISO100] 100:
[ISO200] 200:
[ISO400] 400:
[ISO800] 800:
6
Press the MENU button K to clear the menu.
7
The selected setting ([ISO200], etc.) appears

on the LCD monitor.

• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
• When using the flash for close-up shots, you should set the ISO sensitivity to 200 or less.
If you set the sensitivity to a high ISO setting and then take close-up shots, the image will
be overexposed. The flash brightness cannot be adjusted correctly at ISO 800.
[METERING]
This setting allows you to select the area that the camera uses when setting the exposure.
The available settings are [EVALUATION], [CENTER] and [SPOT AREA]. Use the setting
that best suits your subject.
1
Switch the camera on and press
button until the "
LED.
2
Press the MENU button K to display the menu icons.
on the 4-way button to select
D
.
R
on the 4-way button to select
D
.
the ambient conditions. (default)
Fixed at ISO 100
Fixed at ISO 200
Fixed at ISO 400
Fixed at ISO 800
Selecting the Area Used for Setting the Exposure
" or "
C N
or
O Q
" icon lights on the mode select
FOCUSING SPOT AF
ONG EXP. OFF
ISO AUTO
METERING EVA UATION
DIGITA ZOOM ON
SETTINGS(2/2)
FOCUSING AUTO
LONG EXP. 100
ISO 200
ETERING 400
DIGITAL ZOO 800
SETTINGS(2/2)
Applicable mode: C/N
on the mode
4
4-23