Kyocera Finecam SL400R Instruction Manual page 29

1
Press the POWER button
switch the camera on and then
press or
O
button until the "
the mode select LED.
2
Use the LCD monitor to compose
your shot.
The remaining number of seconds of movie
shooting is shown in the top-right corner of the
LCD monitor.
3
Press the shutter release button half
way to set the exposure and focus
for the subject.
• During movie shooting, the exposure is adjusted
according to the ambient conditions, but the focus does
not change. The movie is shot using the focus set just
before shooting started.
4
When you press the shutter release
button down further, shooting
begins.
Pressing the shutter release button displays the
seconds counter. The red shooting mark "
lights during movie shooting.
5
Press the shutter release button half way to finish shooting.
• If you do not press the shutter release button half way, shooting continues until the
memory card is full.
H
on the mode
Q
" icon lights on
M
to
:26
:26
" also
B
00:04
"Bibip"
2-5
2