Connecting To A Windows Pc; Installing The Usb Drivers (Windows 98 And Windows 98Se Only) - Kyocera Contax SL300RT* Instruction Manual

Connecting to a Windows PC

Installing the USB drivers
If you are using Windows 98 or Windows 98SE, you will need to install the USB drivers,
which are included on the CD-ROM bundled with the camera.
• Do not connect the USB cable until USB driver installation is completed. Connecting the
USB cable prior to installation will prevent successful USB driver installation. If you have
2
mistakenly connected the USB cable, see "Uninstalling the driver software" on p.2-18.
1
Switch the PC on and start up Windows.
2
Load the bundled CD-ROM into the CD-ROM drive.
3
Double-click [My Computer] and then the [CD-ROM icon] to
open the CD-ROM window.
4
Double-click the [SETUP.exe] icon to
begin the installation. Proceed with
the installation as directed by the
on-screen instructions.
5
When the "InstallShield Wizard
Complete" message appears, check
that the "Yes, I want to restart my
computer now" option is selected
and then click [Finish].
Installation ends and the PC restarts.
• If installation fails, uninstall the software as described in "Uninstalling the driver
software" on p.2-18 and then re-install the drivers.
2-12
(Windows 98 and Windows 98SE only)