Switching The Camera On - Kyocera Finecam SL400R Instruction Manual

• When the card access LED is flashing, images are being recorded onto the memory card.
Do not open the card/battery cover or remove the memory card while the LED is flashing
as this could cause data corruption or, in some cases, camera damage.
2
Push the memory card in gently
with your fingertip.
If you push the memory card in slightly, it pops
back out and you can then pull it out completely.
3
Close the card/battery cover.
Close the cover and slide it in the opposite
direction to the arrow ( ) to lock it.

Switching the Camera On

• Check that a memory card is loaded in the camera before switching the camera on.
Press the POWER button
The startup screen is displayed for a few seconds and
then the respective mode screen appears.
• While the camera is switched on, pressing the POWER button
.
H
G
switches the camera off.
H
1
1-5