Setting The Date And Time - Kyocera Finecam SL400R Instruction Manual

■
Viewing the battery level and charging guide
Fully charged
When the battery charge is completely depleted, the
1
"LOW BATTERY" message appears on the LCD monitor.
Depending on the environment in which the digital camera is
being used, the amount of power consumed may increase.
Even if the battery level icon is displayed, the camera may
switch itself off in some camera operating conditions.
When this occurs, charge the battery.

Setting the Date and Time

The first time you use your digital camera, you must set the date and time.
The date and time settings may also be cleared when you remove the battery pack or if you
leave the camera unused for a long period. If this happens, reset the date and time.
1
Press the
button until the "
the mode select LED.
The setup menu appears.
2
Press
U
to select [DATE] and then press
1-6
At least
half used.
or on the mode
O Q
" icon lights on
G
or on the 4-way button
D
Charge low.
Charge
the battery soon.
SET UP(1/3)
F MODE S F
FORM T EXECUTE
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2004.01.01
INSERT D TE NO D TE
SET UP(1/3)
.
R
F MODE S F
FORM T EXECUTE
BRIGHT CNTRL ST ND RD
B CKLIGHT BRIGHT
D TE 2004.01.01
INSERT D TE NO D TE
Camera will not
function.
Charge the
battery.
OW BATTERY