Cropping And Displaying Part Of Video (Digital Ptz) - Canon VB-S30D Operation Manual

Changing the Camera Zoom Ratio
Move the knob on the slider up or down to zoom in or out
The camera zoom ratio will change according to the knob
position on the slider. The knob can also be moved by
clicking on an empty part of the slider.
Note
• In the Admin Viewer, you can also control the zoom with the
Camera Control button (p. 133).
• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting
page, the icon for the digital zoom telephoto end is displayed.
(p. 44).
• Zoom refers to digital zoom only.
Change the Zoom Ratio in the Panorama
Display Area
Click the [Panorama Display] button.
1
2 Change the zoom ratio in the panorama display area
displayed.
You can change the zoom ratio by dragging the yellow
frame lines in the panorama window and changing the
size of the frame. The zoom ratio will adjust to capture
the area in the changed frame.
Note
• Clicking outside the yellow frame lines and dragging will create
blue frame lines. When you release the mouse button, the blue
lines will turn yellow and the camera will change the pan, tilt
and zoom in order to capture that area.
• Zoom refers to digital zoom only.
126
Maximum telephoto
digital zoom
(only when digital zoom is
on)
Maximum telephoto
Slider for zoom
Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)
Maximum Wide Angle
Using the Preset/Home Position
You can control the camera using presets and home
position registered in the camera beforehand (p. 88).
Click the preset selection box and select a preset from the
displayed list to go to the selected preset camera angle.
Click the [Home Position] button to move the camera
angle to the home position.
Preset selection box
Note
Register presets and home position beforehand using the Preset
Setting Tool (p. 90). Registered presets will appear in the preset
selection box.
Compensating Backlight
This control is effective when the video is dark due to
backlight.
Clicking [BLC] brightens video that is dark due to backlight.
Clicking the button again cancels backlight
compensation.
Cropping and Displaying Part of Video
(Digital PTZ)
You can use the Digital PTZ panel to crop and display
part of a camera video in the video display area. It is also
possible to use a preset or home position registered to the
camera.
Digital PTZ
Digital PTZ is a function that facilitates simple panning,
tilting, and zooming without changing the camera lens
position that was adjusted at the time of installation by
[Home Position] button