Canon VB-S30D Operation Manual page 91

Click [Detailed Settings] and select the [Show in
2
viewers] checkbox.
Drag to move or resize the preset preview frame
3
(yellow) shown on the panorama screen to set the
preset.
If you click on the panorama screen, the preview
frame will move to center on the clicked point.
4 Click [Preview settings].
The settings are reflected in the preview frame on the
panorama screen and the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
5
Using the Digital PTZ Function to Set Presets
Use the Digital PTZ function to set part of the area that can
be captured by the camera as a preset.
Select the preset you want to set from the [Preset/
1
Home Position] selection box, and then fill in the
[Preset Name] field.
Be sure to enter the preset name.
Select the [Show in viewers] checkbox.
2
Change the position or size of the preset preview
3
frame (yellow) displayed on [Full Image] to set the
preset position.
If you click on the full video, the preview frame will
move to center on the clicked position.
Click [Preview settings].
4
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
5
Note
Digital PTZ is a function for transmitting only the
specified part of a camera video. Therefore, this function reduces
the load on the network.
Preset Setting Tool
5
91