Canon VB-S30D Operation Manual page 156

Hide thumbs Also See for VB-S30D:
Table of Contents

Advertisement

Important
If the reset switch is pushed, network-related settings will also
be restored to factory default settings including the camera's IP
address, subnet mask, default gateway address, etc.
Accordingly, you can no longer operate the camera from the
computer you were using to connect to the camera before.
When initializing the camera, use the “VB Initial Setting Tool”
installed in your computer to set an IP address appropriate for
the environment in which the camera is used (See “Performing
Initial Settings for the Camera” (p. 28)).
Reset Switch
Reset Switch
For VB-S30D/VB-S31D/VB-S800D, attach the top
4
cover.
For top cover attachment, see the “Installation Guide”
included with the camera.
Page 156

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-s31dVb-s800dVb-s900f

Table of Contents