Changing the Camera Zoom Ratio
Move the knob on the slider up or down to zoom in or out
The camera zoom ratio will change according to the knob
position on the slider. The knob can also be moved by
clicking on an empty part of the slider.
Zoom telephoto end
(only when digital
zoom is on)
Optical telephoto end
Slider for zoom
Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)
Wide end
Note
• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting
page, the icon for the zoom telephoto end is displayed. (p. 53).
• In the Admin Viewer, you can also control the zoom with the
Camera Control button (p. 137).
Change the Zoom Ratio in the Panorama
Display Area
Click the [Panorama Display] button.
1
Change the zoom ratio in the panorama display area
2
displayed.
You can change the zoom ratio by dragging the yellow
frame lines in the panorama window and changing the
size of the frame. The zoom ratio will adjust to capture
the area in the changed frame.
Note
Clicking outside the yellow frame lines and dragging will create
blue frame lines. When you release the mouse button, the blue
lines will turn yellow and the camera will change the pan, tilt and
zoom in order to capture that area.