Sram Dump [Midi] - Tascam DM-24 Service Manual

SRAM DUMP [MIDI]

This proceudre dumps the content of the SRAM in the SMF
(Standard Midi File) format. (Refer to page 21.)
1. When the DM-24 switches into the SRAM DUMP mode, the
following message will appear.
2. Upon pressing ENTER, the dump process starts.
Pressing a cursor key cancels the dump and brings you
back to the DIAG menu screen.
The next pop-up message is displayed during the dump
process.
Once the process starts, there is no way to abort it.
3. Upon completion of the dump, the pop-up message automati-
cally goes out, bringing you back to the DIAG menu screen
with a check mark placed in the corresponding check box.
18
TASCAM DM-24