Tascam DM-24 Service Manual page 3

MONITOR OUTPUTS (CR (BAL))
Balanced 1/4" jacks
Nominal output level: +4dBu (CR VR max.)
Maximum output level: +20dBu (CR VR max.)
Output impedance: 100Ω
MONITOR OUTPUTS (STUDIO)
RCA pin jacks
Nominal output level –10dBV
Maximum output level: +6dBV
Output impedance: 100Ω
PHONES 2 x 1/4" stereo jacks
Maximum output level: 120 mW + 120 mW (33Ω load)
<Digital audio I/O>
DIGITAL INPUTS (1, 2)
2 x XLR-type female connectors (input impedance 110Ω)
2 x RCA pin jacks (input impedance 75Ω)
AES3-1992 or IEC60958 data format (automatically
detected)
24-bit word length
Switchable sampling frequency conversion available
DIGITAL OUTPUTS (1, 2)
2 x XLR-type male connectors (output impedance 110Ω)
2 x RCA pin jacks (output impedance 75Ω)
AES3-1992 or IEC60958 data format (software selec-
table)
24-bit word length
TDIF-1(1, 2, 3)
3 x 25-pin D-sub connectors (metric lock screws)
Conform to TDIF-1 standard
24-bit word length
ADAT IN/OUT
2 x "Lightpipe" optical connectors
Conform to ADAT OPTICAL specifications
24-bit word length
Sampling frequencies
Internal 44.1kHz/48kHz, 88.2kHz/96kHz (high sampling
frequencies)
External ±6.0% ofIs
<Miscellaneous I/O connections>
WORD SYNC IN
BNC connector
Switchable 75Ω termination
TTL level
WORD SYNC OUT/THRU
BNC connector
Switchable between through and output
TTL level
3
TASCAM DM-24