Tascam DM-24 Service Manual page 15

4. When the test was successful, the next pop-up message appears.
This pop-up message automatically goes out and brings you
back to the COMMUNICATION TEST screen with a check
mark placed in the corresponding check box.
5. When a time-out occurs, the next pop-up message will
appear.
This pop-up message goes out when you press a cursor key.
No check mark is placed in the check box and the RESULT
reads NG.
6. Move the cursor to EXIT in the COMMUNICATION TEST
screen and press ENTER to return to the DIAG menu screen. If
all the three test items are successfully checked on the COM-
MUNICATION TEST screen, the COMMUNICATION TEST
item on the DIAG menu screen is check marked.
15
TASCAM DM-24