Procedures For Checking The Version Number And Initializing The Sram - Tascam DM-24 Service Manual

[Procedures for Checking the Version Number
and Initializing the SRAM]
Upon completion of the Program Update, check the Version
Number and initialize the SRAM, as follows.
1. Get to the PREFERENCES sub-screen under the OPTION
screen, move the curosr to the [Version Info.] button, and press
ENTER.
2. Check the pop-ups for the same version number both for the
Console and for the Effector.
3. Switch off the power, then, while holding down 2ND F. +
EQUALIZER [HIGH] + LIBRARY [-], switch the power back
on to let the DIAGNOSTICS screen appear.
The update was successful if the updated version number is
shown in the upper right corner of the screen.
27
TASCAM DM-24