Tascam DM-24 Service Manual page 4

MIDI IN, OUT, THRU/MTC OUT
3 x 5-pin DIN connectors—conform to MIDI specifica-
tions
TIME CODE IN
RCA pin jack
Conforms to SMPTE specifications
DTRS REMOTE OUT
15-pin D-sub male (metric lock screws)
Conforms to DTRS SYNC standard
EXT SW
1/4" mono jack
TO METER
25-pin D-sub connector (non-metric lock screws)
For use with the optional MU-24/DM
RS-422 (for Sony 9-pin)
9-pin female D-sub connector (non-metric lock screws)
wired to RS-422 standards
GPI (for Machine start)
9-pin female D-sub connector (non-metric lock screws)
wired for GPI control
Pin 1=GPI1, Pin 2=GPI2, Pin 3=GPI3, Pin 4=GPI4, Pin
5=GPI5, Pin 6=GPI6,
Pin 7=GPI7, Pin 8=GPI8, Pin 9=ground
<Equalization>
EQ switch
On/Off
HIGH filter
Gain: ±18dB, 0.5dB resolution
Frequency: 31Hz to 19kHz
Q: 0.27 to 8.65
Type: Hi-shelving, Peak, LPF
HI MID filter Gain: ±18dB, 0.5dB resolution
Frequency: 31Hz to 19kHz
Q: 0.27 to 8.65
Type: Peak, Notch
LO MID filter
Gain: ±18dB, 0.5dB resolution
Frequency: 31Hz to 19kHz
Q: 0.27 to 8.65
Type: Peak, Notch
LOW filter
Gain: ±18dB, 0.5dB resolution
Frequency: 31Hz to 19kHz
Q: 0.27 to 8.65
Type Low-shelving, Peak, HPF
4
TASCAM DM-24