Pod And Dial Test - Tascam DM-24 Service Manual

POD & DIAL TEST
This test checks if each POD recognizes the rotational direction
when rotated.
1. When the DM-24 switches into the POD & DIAL TEST
mode, the following screen appears.
2. A POD to be rotated is indicated by a bliking frame. Rotate
that POD. (First, the JOG/DATA dial will be indicated.)
3. Rotate the POD all the way down (to the left) then all the
way up (to the right), and go on to the next POD.
4. When all the PODs have been checked, the DIAG menu
screen reappears with the POD & DIAL TEST item check
marked.
PTo abort the process, press ENTER.
13
TASCAM DM-24