HP Pavilion 17 Maintenance And Service Manual page 75

6.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the two screw covers (1) and the two Phillips PM2.5×5.5 screws (2) that secure the
display bezel to the display assembly.
The screw covers are available in the Rubber Kit, spare part number 720677-001.
b. Flex the inside edges of the top edge (1), the left and right sides (2), and the
bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
Component replacement procedures
67