HP Pavilion 17 Maintenance And Service Manual page 90

2. Remove the heat sink (2).
NOTE:
the system board components, it may be necessary to move the heat sink from side to side to
detach it.
NOTE:
UMA memory.
3.
Following the 1 through 4 sequence stamped into the heat sink, loosen the four captive Phillips
screws (1) that secure the heat sink to the system board.
82 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Due to the adhesive quality of the thermal material located between the heat sink and
Steps 3 and 4 apply to computer models equipped with a graphics subsystem with