Icom IC-M323 Instruction Manual page 56

7
DSC OPERATION
■ Making DSC calls
D Making a Position Reply call (continued)
Manual Reply:
Enter "POSITION REPLY" in the DSC CALLS menu.
q
➪ DSC Calls
MENU
(Push [MENU].)
• If no Position Request call is received, the Position Reply item
will not be displayed.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
Select a desired Position Request call to reply to, using
w
Dial or [Y]/[Z], then push Dial or [ENT].
46
➪ Position Reply
(Rotate Dial, then push [ENT].)
The Position Reply call confirmation screen is displayed.
e
Push [CALL] to make an acknowledgement call.
While transmitting the reply call, the screen shown below
r
is displayed, and then returns to the normal operating
mode.