Entering A Call Channel Data; Microphone Lock Function - Icom IC-M323 Instruction Manual

4
BASIC OPERATION

■ Entering a Call channel data

You can enter data in Call channel in each channel group for
quick recall.
Select the desired channel group (INT, USA, CAN, ATIS,
q
or DSC) to be entered. (p. 10)
Hold down [16/C] for 1 second to select the Call channel of
w
the selected channel group.
• "CALL" and the Call channel number is displayed.
Hold down [16/C] again for 3 seconds (until a long beep
e
changes to 2 short beeps) to enter the Call channel entry
mode.
Rotate Dial or push [
r
Push [ENT] to save the displayed channel as the Call
t
channel.
• Push [CLEAR] to cancel.
14
∫]/[√] to select a channel.

■ Microphone Lock function

The Microphone Lock function electrically locks [∫], [√] and
the [HI/LO] keys on the supplied microphone. This prevents
accidental channel changes and function access.
While holding down [HI/LO] on the microphone, hold down
➥
[PWR](Dial) to turn ON the transceiver and turn the Micro-
phone Lock function ON or OFF.
[Y]/[Z]
[HI/LO]