Scan Operation; Scan Types - Icom IC-M323 Instruction Manual

5

SCAN OPERATION

■ Scan types

Scanning is an efficient way to locate signals quickly over a
wide frequency range. The transceiver has a Priority scan
and a Normal scan.
When the Weather Alert function* is ON, the weather channel
is also checked while scanning. (p. 71)
*For only U.S.A and Australian version transceivers.
PRIORITY SCAN
CH 01
WX*
CH 05
*When the weather alert function is activated.
(For only U.S.A and Australian version transceivers.)
The Priority scan sequentially searches through all Favor-
ite channels while monitoring Channel 16. When a signal is
detected on Channel 16, the scan pauses until the signal
disappears. When a signal is detected on a channel other
than Channel 16, the scan becomes a Dualwatch until the
signal disappears.
16
CH 02
CH 16 CH 03
CH 04
Set the Favorite channels (scanned channel) before scan-
ning. Clear the Favorite channels which inconveniently stop
scanning, such as those for digital communication use. (Refer
to the next page for details.)
Choose Priority or Normal scan in the Menu screen. (p. 70)
NORMAL SCAN
CH 01
WX*
CH 05
*When the weather alert function is activated.
(For only U.S.A and Australian version transceivers.)
The Normal scan, like the Priority scan, sequentially
searches through all Favorite channels. However, unlike
the Priority scan, Channel 16 is not checked unless it is set
as a Favorite channel.
CH 02
CH 03
CH 04