Safety Information - Kyocera FS-C8100DN Operation Manual

Changes or modifications not expressly approved by the manufacturer for compliance could
void the user's authority to operate the equipment. Shielded circular cables should be used for
interfacing with the computer.
Precautions for Use
Any modifications without prior permission of Kyocera Mita may cause harmful interference.
If any modifications or changes are made to this equipment without prior permission of Kyocera
Mita, Kyocera Mita as the manufacturer does not guarantee the compliance with the FCC Rules.
The use of equipment that does not comply with the FCC Rules is prohibited.

Safety Information

Laser Safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and
Human Services (DHHS) Radiation Performance Standard according to Radiation Control for
Health and Safety Act of 1968. This means that the printer does not produce hazardous laser
radiation. Since radiation emitted inside the printer is completely confined within protective
housings and external covers, the laser beam cannot escape from the printer during any phase
of user operation.
Laser Notice
This printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter
for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to
the requirements of IEC 825.
DANGER: CLASS 3B LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Radio Frequency Transmitter
This machine contains the transmitter module. We, the manufacturer (Kyocera Mita
Corporation) hereby declare that this equipment (page printer), model FS-C8100DN is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Radio Tag Technology
In some countries the radio tag technology used in this equipment to identify the toner container
may be subject to authorization and the use of this equipment may consequently be restricted.
vii