Kyocera FS-C8100DN Operation Manual page 34

Maintenance
2
Set the paper length guide to the selected paper size.
NOTE:
3 Set the paper width guide to the selected paper size
with the paper width adjusting tab.
NOTE:
To load paper of A4/letter or smaller, set the
supplement lever of the paper length guide upright as
illustrated.
4 Set paper aligning with the left side of the paper
cassette.
IMPORTANT: Confirm that the paper length and paper
width guides are lined up closely with paper. If space is
found, set the guide again. Otherwise, it may cause
paper jams.
Do not set folded paper. Otherwise, it may cause paper
jams.
Do not exceed the upper limit of the tray. Otherwise, it
may cause paper jams.
3-4
Paper size is printed on the paper cassette.
Paper size is printed on the paper cassette.