Replacing The Toner Container - Kyocera FS-C8100DN Operation Manual

Replacing the Toner Container

This section explains how to replace the toner containers. When replacing the toner container of
any color, always replace the waste toner box at the same time. If this box is full, the printer may be
damaged or contaminated by the waste toner that may spill out of the box.
NOTE:
(such as floppy disks) away from around the toner container. This is to avoid damaging media by
the magnetism of the toner.
You do not have to turn the printer power off before starting the replacement. Any data that may be
in the process of printing in the printer will be deleted if you turn the printer power off.
To replace the toner container, first make sure of the color of the toner container requiring
replacement. In this example, it is assumed that you are replacing the black toner container.
1
Open the front cover.
2 Turn the toner container lock lever clockwise and set it
to the upright position.
3 Push and lift up the clip on the upper part of the toner
container (A), and then pull the toner container.
4
Remove the toner container.
During toner container replacement, temporarily put storage media and computer supplies
Maintenance
A
3-9