Setting Menu - Sony VFH-990 Maintenance Manual

2-1. Setting Menu

The setting menu is used for selecting and adjusting all of
the parameters.
Setting menu configuration
The Setting menu consists of the following menus.
. OPERATION menu
. SERVICE menu
n
The TOP menu screen is also available for displaying the
entire configuration of the menu items.
For information about how to display the TOP menu, refer
to "2-2. TOP Menu".
Description of switches
MENU knob
Selects items in the menu or changes the parameters.
Turn : Move to the next item or page and change parame-
ters.
Press : Select the next item or page and set parameters.
MENU switch
Displays the setting menu.
Deletes changed parameters during setting and returns to
page selection mode or the TOP menu.
POWER
OFF
POWER
MENU
OFF ON
MENU switch MENU knob
HDVF-C950W
Section 2
Setting Menu
PEAKING BRIGHT CONTRAST
MENU
ON
Basic operations
1. Display the menu
Press the MENU switch to display the OPERA-
TION menu.
2. Select the menu page
With the "?" mark displayed in front of the page
number (page selection mode), turn the MENU knob.
When the desired page is displayed, press the MENU
knob.
3. Select the item
With the cursor mark "→" display in front of the setting
items in the selected page (item selection mode), turn the
MENU knob. When the cursor mark "→" lines up with
the item you want to change, press the MENU knob.
4. Change the parameter
With the "?" mark displayed in front of the parame-
ter (parameter changing mode), turn the MENU
knob to change the parameter.
If the parameter is a number, turning the MENU
knob clockwise increases the value and turning it
counter-clockwise decreases the value.
Turning the knob far increases the value quickly,
while slowly turning the knob fine-tunes the value.
5. Set the parameter
Press the MENU knob.
This sets the parameter and returns to item selection
mode.
n
If the MENU switch it pressed before pressing the
MENU knob, the parameter returns to the value
before making changes and the screen returns to
item selection mode.
6. Exit the menu display
Every time the MENU switch is pressed, a different
operation is performed. First, the screen switches to
item selection mode, then page selection mode, then
returns to the TOP menu
Pressing the MENU switch a final time exits menu
display.
7. Return the parameters to the defaults
Move the cursor mark "→" in front of the parame-
ter that you want to return to default. Press and hold
the MENU knob for two or more seconds.
*1 : Only has to be performed when operating from the TOP menu.
Refer to "2-2. TOP Menu".
*1
.
2-1 (E)