Brickcom OB-100A Quick Installation Manual page 24

6. If the camera supports the EasyLink
page will be displayed. Otherwise, this page will not be shown.
*If desired, click <Skip> to skip this setting.
EasyLink is a unique Brickcom function which allows users to assign a unique
TM
EasyLink name to their network camera's IP address. There is no need to
configure the router to open up ports or remember hard-to-memorize IP
addresses. Users can log onto [uniqueEasyLinkname].mybrickcom.com to
view the camera's web GUI and live view.
1. Enter a unique EasyLink name whose length must be between 5-32
characters.
2. When finished, click the arrow button to continue.
TM
function, the following