Compressor/Electrical Specifications; Compressor Pins; Specifications - Electrolux Ice Maker Service Manual

Electrical Specifications

Compressor Pins:

To measure start winding resistance, measure across the C-S pins.
To measure run winding resistance, measure across the C-R pins. These pins should never measure any
resistance to ground. This would indicate a shorted compressor.

Specifications:

Compressor Start Winding: 12.0 OHMS.
Compressor Run Winding: 2.9 OHMS.
Water Valve Coil Resistance: 280 OHMS.
Bypass Coil Resistance: 380 OHMS.
Pump Motor Winding Resistance: 71.5 OHMS.
R S
STARTING
C
RELAY
3/4" OVERLOAD
PROTECTION
15