Table of Contents
Advertisement
16 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)
Viewing input tray information
1. On the Show settings menu, press the Down key once to see the upper tray
settings, twice to see the lower tray settings, followed by the Confirm key'.
The 'Input tray' screen is displayed (example):
The following information is displayed for the input tray:
• the status of the Film Identification tag (OK, disabled, overruled),
• the actual film data, as it has been modified by the Key-operator:
• the film view (normal, back),
• the number of prints for this film pack,
• the total number of prints for the input tray,
• the film data read from the film identification tag:
2. Press the Confirm key to return to the Show settings menu.
Related Links
Accessing the Show settings menu
2830F EN 20210520 0952
Note:
In this manual, we always will elaborate a case for the lower
tray. The procedures of showing the settings are identical for the
upper tray.
On the Show settings menu, press the Down key once to see the
upper tray settings, twice to see the lower tray settings.
• film type,
• film format.
• film type,
• film format,
• brand (ABC code),
• order number,
• pack number.
on page 14
Advertisement
Table of Contents
