Brickcom FD-100A Series Quick Installation Manual page 7

For wall installation:
3.3 Chose the location on the wall to place the camera. Attach the
location sticker to the desired spot.
3.4 Drill two holes through the center of the two location holes on the
sticker.
3.5 Hammer the two plastic anchors which are provided in the product
package into the two location holes.
3.6 Mount the camera on the wall and position to two screw slots over the
plastic anchors.
screwdriver to tighten the screws clockwise until they are secure.
3.7 Place the dome cover back on the camera device.
Insert the screws into the holes and use the